38.0x38.0x19.0mm
Bomar Crystal is able to offer a full line of ultra low tolerance thru hole Oven Controlled Crystal Oscillators. OCXOs are used for applications where frequency tolerance and stability are critical like radar systems, sonet clocks, synthesizers, test and measurement instruments, GPS tracking and cellular base stations. Frequency stability to ±5ppb with low phase noise is available.
Features
Output Wave Form | HCMOS or Sine Wave | |
Frequency Range | 10.000 - 200.000MHz(AT) 10.000 - 120.000MHz(SC) | |
Type of Crystal Cut | AT-cut or SC-cut | |
Supply Voltage | 12.0Vdc or 15.0Vdc | |
Power Consumption | 5.0W max. - warm up 2.0W max. - steady state | |
Initial Frequency Accuracy (at +25oC) | ±0.2ppm with EFC set at center of control voltage | |
Frequency Stability | vs Operating Temperature Range (referenced to +25oC.) | ±50ppb(AT) or ±5ppb(SC) over 0oC. to +50oC. ±100ppb(AT) or ±10ppb(SC) over -20oC. to +70oC. ±500ppb(AT) or ±50ppb(SC) over -40oC. to +85oC. Custom spec. on request |
vs Aging / 1 day | ±10ppb max.(AT) or ±5ppb max.(SC) | |
vs Aging / first year | ±500ppb max.(AT) or ±200ppb max.(SC) | |
vs Aging / 10 years | ±2.0ppm max.(AT) or ±0.5ppm max.(SC) | |
vs 5% Supply Voltage Change | ±10ppb max. | |
vs 5% Load Change | ±10ppb max. | |
Electronic Frequency Control Pin 1 (resistance adj. also available) |
Tuning Range | ±2ppm min.(AT) or ±0.7ppm min.(SC) |
Control Voltage Range | 12.0V & 15.0V(0-5.0V) | |
Linearity | ±10% | |
Transfer Function | Positive | |
Warm up time (at +25oC.) | ±400ppb, 3 min. max.(AT) or ±200ppb, 3 min. max.(SC) | |
HCMOS Square Wave | VOH:Logic High "1" | 90% Vdd min. |
VOL:Logic Low "0" | 10% Vdd max. | |
Duty Cycle | 45% to 55% | |
Rise Time and Fall Time | 6nS max. | |
Load | 15 pF | |
Sine Wave | Output | 7dBm min. |
Load | 50 ohms | |
Phase Noise | ||
10Hz | -80dBc/Hz | |
100Hz | -115dBc/Hz | |
1kHz | -140dBc/Hz | |
10kHz | -145dBc/Hz |
Contact Us