Bomar Crystal is able to offer two ultra low tolerance surface mount (smd) Oven Controlled Crystal Oscillators. OCXOs are used for applications where frequency tolerance and stability are critical like Satellite Radios, Sonet Clocks, Synthesizers, Instrumentation and GSM Base Stations. Frequency stability to ±5ppb with low phase noise is available.
Features
Output Wave Form | CMOS or Sine Wave | |
Frequency Range | 2.000 MHz - 100.000 MHz | |
Standard Frequencies (partial list) | 10.000, 12.800, 16.384, 20.000, 38.400, 40.000, 100.000 MHz | |
Type of Crystal Cut | AT-cut or SC-cut | |
Supply Voltage | 3.3 Vdc or 5.0 Vdc | |
Power Consumption | 3.6W max. - warm up 1.4W max. - steady state | |
Initial Frequency Accuracy (at +25oC) | ±0.2ppm with EFC set at center of control voltage | |
Frequency Stability | vs Operating Temperature Range (referenced to +25oC.) | ±50ppb(AT) or ±5ppb(SC) over 0oC. to +50oC. ±100ppb(AT) or ±10ppb(SC) over -20oC. to +70oC. ±100ppb(AT) or ±30ppb(SC) over -40oC. to +75oC. Custom spec. on request |
vs Aging / 1 day | ±2ppb max.(AT) or ±1ppb max.(SC) | |
vs Aging / first year | ±300ppb max.(AT) or ±100ppb max.(SC) | |
vs Aging / 10 years | ±2.0ppm max.(AT) or ±0.5ppm max.(SC) | |
vs 5% Supply Voltage Change | ±10ppb max. | |
vs 5% Load Change | ±10ppb max. | |
Electronic Frequency Control Pin 1 |
Tuning Range | ±3 ppm min.(AT) or ±0.7ppm min.(SC) |
Control Voltage Range | 3.3V(0-3.3V), 5.0V(0-5.0V) | |
Linearity | ±10% | |
Transfer Function | Positive | |
Warm up time (at +25oC.) | ±200ppb, 3 min. max.(AT) or ±100ppb, 3 min. max.(SC) | |
CMOS Square Wave | VOH:Logic High "1" | 90% Vdd min. |
VOL:Logic Low "0" | 10% Vdd max. | |
Duty Cycle | 45% to 55% | |
Rise Time and Fall Time | 6nS max. | |
Load | 15 pF, 50pF max. | |
Sine Wave | Output | 5 dBm min. |
Load | 50 ohms | |
Phase Noise | ||
10Hz | -120dBc/Hz | |
100Hz | -140dBc/Hz | |
1kHz | -145dBc/Hz | |
10kHz | -150dBc/Hz |
Contact Us